FiiO FT3 Large Dynamic High-Res Over-Ear Headphones 32ohm

Finally a large over-ear from FiiO - now also available as a version that is ideal for mobile use!

.

Highlights:

• Large dynamic high-res over-ear headphones
• 60mm large dynamic LCP/aluminum coated driver
• 32Ω high impedance
• Asymmetric internal and external magnetic circuit system
• Open back design
• 392-core monocrystalline copper cable
• Anodized aluminum construction
• Lightweight hollow design
• 4 different audio plugs included

High-end HiFi, easy to drive

32Ω Design A feeling of relaxation, enveloped in dense mids and bass The 32Ω version of the FT3 focuses on delivering lush but very textured mids and bass.

The bass is very present and robust, but still very controlled and detailed. The mids are also lush and relaxed, making the FT3 very pleasant to listen to.

60 mm dynamic driver

Sound is created by the vibration of material - so the choice of driver is very important for sound quality. The FT3 features a large 60mm dynamic driver, which is unusual in its class. Compared to a smaller driver, the FT3 can expel more air and convert the energy into sound more efficiently - the result is a more natural yet robust sound with a spacious soundstage.

The FT3's large dynamic driver has other advantages too. For example, the diaphragm's size means it is able to carry a higher output, resulting in less distortion with large dynamic signals.

Additionally, the larger driver is more easily able to produce lower frequencies to achieve deeper bass.

Sophisticated design - Beryllium-coated seal + DLC membrane

The diaphragm is one of the most important components of a dynamic driver. And not every diaphragm material can meet the requirements of the FT3 due to the large driver size.

After countless tests at FiiO, an LCP/aluminum coated driver/gasket was chosen for the more portable 32 ohm variant. The FT3 driver's gasket is coated with aluminum. This not only results in a lighter gasket (and thus a lighter driver), but also a stiffer gasket that is better able to handle the movements of the large dynamic driver, resulting in less distortion.

The FT3's diaphragm is made of LCP, which is very robust and lightweight compared to other diaphragm materials.

This means that the FT3 driver is less prone to breakage and thus non-linear distortion, while at the same time having an extremely extended frequency response and improved sound image..

Pure sound - 32Ω high impedance

The voice coil is made of ultra-fine copper-clad Japanese aluminum with a diameter of only 0.035mm. This finer voice coil allows the driver to follow signals better and faster, has anti-interference capabilities and enables thunderous dynamics over a wide frequency response range.

.

Hear the artist's intention - Asymmetric internal and external magnetic circuit system

The FT3 uses powerful N52 neodymium magnets to maximize sound quality at an impedance of 32Ω. These magnets are arranged in an optimized asymmetric internal and external magnetic circuit system.

When the voice coil begins to move during sound reproduction, the optimized magnetic circuit compensates for this movement of the voice coil and diaphragm, especially during large dynamic changes - allowing for more effective use of magnetic energy and better control of the voice coil.

.

Quality cable - monocrystalline copper wire

The FiiO FT3 comes standard with a 1.5m long 23AWG cable made of high purity monocrystalline copper wire.

Outer shell material: TPE

Shielding layer: PCOCC-A (26/0.12X2)

Insulation layer: PFA

Conductor: PCOCC-A (3/20/0.8X2AWG23)

Outer diameter: 2.4mmx2 (parallel structure)

.

Widely compatible - 4 interchangeable audio plugs are standard

The FT3 cable is equipped with the following 4 types of interchangeable plugs:

3.5mm / 4.4mm interchangeable plugs

3.5mm to 6.35mm adapter

4.4mm to XLR-4 balanced adapter

*The interchangeable audio plugs are officially patented by FABRILOUS.

.

Lighter and more stable - aluminum alloy construction

The exterior of the FT3 is made entirely of aluminum alloy, which not only feels luxurious but is also very strong yet lightweight, making the FT3 the perfect combination of a comfortable listening experience and enough durability to withstand life's challenges.

.

Full comfort - With lightweight, hollow mesh design

The FT3's design starts with hexagonal elements as a base, which when combined with the usual look of open-back headphones creates a bold sci-fi appearance.

The open-back design features a hollowed-out mesh to not only further reduce weight and increase listening comfort, but also to fully showcase the driver's capabilities in a more open environment.

Removes a layer of veil from your music - Open design

The FT3 features an open design that reduces unwanted vibrations and resonances and results in a larger soundstage because when the driver pushes air into the cabinet, the open back means the air hits it.

The result is that the details in the music are reproduced more clearly and naturally in a wide, open soundstage, just as if you were listening to a live performance.

.

Freely rotating 3-axis swivel design

The FT3 has been extensively tested for fit in the FiiO labs, and the 3-axis pivot design is a result of that testing. The 3-axis pivot design is specifically designed to allow the FT3 to better conform to a variety of head and face shapes to improve comfort and seal, and maximize sound quality.

.

Innovative details - Angled drivers parallel to the ear

The FT3's drivers are angled to be parallel to the ear when worn. This helps reduce high frequency response caused by the waves hitting the contour of the ear rather than entering it.

Angled drivers can also minimize unwanted reflections caused by the ear cup that would result in standing waves, as well as reducing distortion in the frequency response.

Additionally, there is a reflective tip on the back of the FT3 cup that is specifically designed to direct the sound waves generated by the driver so that unwanted reflections do not interfere with each other, reducing both sound errors and unwanted artifacts in the frequency response.

.

Put Dress

2 sets of different sounding ear pads

The FT3 comes with 2 sets of ear pads, each with its own sound

Velour ear pads: Balanced sound, enhanced atmosphere, majestic experience

Replica leather ear pads: Clear sound, large sound stage, high detail

.

Thorough protection - storage bag included

The FT3 comes with a storage pouch that provides comprehensive protection for your headphones in a lightweight yet luxurious package.

Technical data

• Headphone Type: Dynamic Driver Headphones
• Frequency Range: 7Hz-40kHz
• Driver Type: 60mm Dynamic Driver
• Diaphragm Material: LCP Aluminum Coated + Aluminum Driver
• Impedance: 32Ω
• Sensitivity: 110dB (1Vrms)@1kHz
• Weight: About 391g (without cable)
• Earpad Pressure: 4.0N±0.3N
• Cable Length: About 1.5m
• Cable Material: 392-Core Monocrystalline Copper Wire
• Headphone Jack: Dual 3.5mm
• Rich Accessories: 3.5mm
• Interchangeable Plug / 4.4mm Interchangeable Plug / 3.5mm Female to 6.35mm Male Adapter /
• Symmetrical 4.4mm Female to XLR-4 Male Adapter
• Storage Case
• 2 Pairs of Earpads