Scan Speak Scan-FAST floorstanding loudspeaker in Hobby HiFi 2/2012

Kit without housing price per speaker

A small Scan Speak broadband speaker inspired the Hobby HiFi editorial team to create a broadband system with bass support, known as Fullrange and Subwoofer Technology (FAST). The name of the system was therefore quickly found: Scan FAST. Bernd Timmermanns uses the Scan Speak 10F/8424G00 broadband speaker, which is also called the 10WB0824G in Germany. This is supported in the bass by the 26 cm Scan Speak 26W/8534G00 woofer. Both are separated by a 2nd order crossover (12 dB/octave slope).

.

Technical data:

• Impedance: 6 Ohm 
• Sound pressure level (2.83V/1m): 86 dB
• Dimensions (HxWxD): 1000 x 350 x 350 mm 
• Frequency range (-8dB): 30 - 22000 Hz 
• Crossover frequency(s): 330 Hz 
• Principle: closed box

Highlights

• ScanSpeak midrange speaker 10F-8424G00
• ScanSpeak woofer 26W/8534-G00
• PE sealing strip, 5x2 mm, 5 pcs. x 1.5 m
• 2.5x insulating material made of polyester wadding, 125 g for 20L volume
• 1.5x cut from needle felt, 1100 g/m2 1000x400, 10mm
• Biwiring terminal T122 Au with gold-plated brass terminals
• 3m speaker cable 2x1.5 mm2, transparent
• Pan screws 4x20 black, 12 pieces
• Pan screws 3.5x17 black, 4 pieces
• Construction plan for the kit the crossover components (right), to be assembled on a wooden board.
• Electrolytic capacitor rough, 82 μF/100 Vdc
• Electrolytic capacitor rough, 470 μF/63 Vdc
• Electrolytic capacitor smooth, 68uF / 50 Vdc
• Electrolytic capacitor smooth, 150 μF / 50 Vdc (68 μF and 82 μF in parallel)
• Mundorf air coil L71, 2.7 mH/1.53 Ohm
• Mundorf air coil L71, 22 mH/5.61 Ohm
• Mundorf BS100 core coil 4.7mH/0.46 Ohm
• Metal oxide resistor MOX10 1.0 Ohm (brown-black-gold)
• Metal oxide resistor MOX10 2.2 Ohm (red-red-gold)
• Metal oxide resistor MOX10 15 Ohm (brown-green-black)