Seas Breezer floorstanding loudspeaker Kit with high-end crossover

Kit with high-end crossover without housing price per speaker

Breezer is a design by Holger Barske and Christian Gather. The aim: to achieve an excellent result with simple means; ... and: to create something unusual. For this purpose, the Seas broadband FA22RCZ was installed in a housing with a triangular floor plan. Another inspiration came from the classic "Voice of the Theatre", which has a large hole near the bottom. The editors wanted to reproduce this. This resulted in a box that is open at the bottom. A crossover - it is not absolutely necessary - but we still want to provide you with it as suggested by the authors. It consists of a blocking circuit and an impedance linearization for tube amplifiers

In our high-end version we supply a Mundorf copper foil coil and a Mundorf MCAP Supreme capacitor in the signal path to the broadband speaker.

Technical data:

• Impedance: 8 Ohm
  
• Sound pressure level (2.83V/1m): 93 dB 
• Dimensions (HxWxD): 1180 x 470 x 412 mm 
• Frequency range (-8dB): 55 - 18000 Hz
• Crossover frequency(s): Hz 
• Principle: Transmission line box

Highlights

• Seas broadband FA22RCZ
• a pair of pole terminals, gold-plated, red+black
• 1.5m speaker cable 2x1.5 mm2, transparent
• Pan screws 3.5x17 black, 8 pieces
• Construction plan for the kit the crossover components (right), to be assembled on a wooden board.
• Mundorf MKP capacitor 8.2 μF / 250 V
• Mundorf MCAP-Supreme 6.80 μF / 800 V
• 1.0 mm air coil, 0.56 mH/0.36 Ohm
• Mundorf foil coil CFC16-0.47mH/0.22Ohm
• MOX10 resistor 12 Ohm/10Watt (brown-red-black)
• MOX10 resistor 15 Ohm/10Watt (brown-green-black)

.