Celestion Cinecor L Floorstanding speakers Kit with high-end crossover

Kit with high-end crossover without housing, price per speaker

Cinecor L is a two-way floorstanding loudspeaker for high volumes. Cinecor L is a bass reflex loudspeaker with chassis from Celestion and Wavecor. The loudspeaker contains the following chassis: - a tweeter horn with Celestion CDX1-1747 drive with Celestion H1-7050 - a PA woofer Wavecor WF259PA01 The loudspeaker was developed by Thomas Schmidt. The crossover consists of: - a 2nd order high pass (12 dB / octave) for the tweeter. - a 3rd order low pass (18 dB / octave) for the woofer. The frequency response of the loudspeaker is balanced. The decay spectrum is almost flawless. The nonlinear distortions at high volumes (95 dB, 1 m) are below 0.8% above 300 Hz and remain below 2.3% in the audible range even at extremely high levels (105 dB, 1 m).

The high-end kit is equipped with baked varnish coils in the important places to reduce the microphonic effect (the current through the coil generates a magnetic field, which in turn sets the winding in motion. This movement induces voltages in the coil, which are added to the useful signal. The tighter the winding of the coil, the less the useful signal is distorted.) The capacitors for the Celestion CDX1-1747 with Celestion H1-7050 - where quality is particularly important - are high-quality Clarity Cap CSA MKP capacitors with 630 V.

.

Technical data:

• Impedance: 6 Ohm
• Sound pressure level (2.83V/1m): 92 dB
• Dimensions (HxWxD): 1000 x 400 x 200 mm
• Frequency range (-8dB): 30 - 21000 Hz
• Crossover frequency(s): 1800 Hz
• Principle: bass reflex box

.

• Wavecor WF259PA01, 8 Ohm, PA woofer
• Celestion CDX1-1747, 1.75 inch Kapton driver
• Celestion H1-7050 NoBell horn, aluminum, 70x50 (T5134)
• Bass reflex tube HP100, 100x197 mm, black
• 0.5x PE foam sealing strip, 5x2 mm, roll 7.5 m
• 2x Sonofil insulation material 100 x 35 cm for 20 liters
• Convoluted foam panels N25 97.5x49x4cm anthracite/black
• Pole terminals PK31, one pair, gold-plated, red+black
• 2m speaker cable 2x1.5 mm2, transparent
• 1.5x Allen wood screws 5x30mm, black 8 pieces
• Construction plan for the kit
• ClarityCap CSA capacitor 3.3μF / 630 Vdc
• ClarityCap CSA capacitor 4.7μF / 630 Vdc
• Audaphon MKP CAP Superior 15 μF / 400 Vdc
• Mundorf baked varnish air coil BL100, 0.47 mH/0.32 Ohm
• Mundorf baked varnish air coil BL100, 0.68 mH/0.39 Ohm
• Mundorf baked varnish air coil BL140, 0.68 mH/0.23 Ohm
• Mundorf baked varnish air coil BL140, 2.2 mH/0.46 Ohm
• MResist Supreme resistor 15 Ohm / 20 Watt
• Metal oxide resistor MOX10 10 Ohm (brown-black-black)
• Metal oxide resistor MOX10 15 Ohm (brown-green-black)