Celestion Monacor Menhir high-efficiency floorstanding loudspeaker in K+T 6/2008

Menhir kit without housing Price per speaker

Achieving an unusual dynamic range was the initial idea behind the development of Menhir. Menhir (for menhir) has become an exceptional top-class speaker with a high level of efficiency.

For the crossover components, we supply components from Jantzen, Mundorf, Intertechnik and ClarityCaps instead of just Monacor components, as this gives you a much larger selection. For the coils in series with the woofer, we supply them with 1.4 mm wire instead of 1.2 mm, as this means the crossover gets less hot and the bass is a little tighter. We also supply MKP capacitors throughout, instead of the more lossy MKT capacitors. The price does not increase due to the improved components! We are also happy to supply original Monacor components upon express request.

.

Technical data:

• Impedance: 8 Ohm
• Sound pressure level (2.83V/1m): 93 dB
• Dimensions (HxWxD): 105 x 36.8 x 45 cm
• Frequency range (-8dB): 31 - > 20000 Hz
• Crossover frequency: 2000 Hz 
• Principle: bass reflex box

.

• Mid-woofer SP-12A/302PA 
• Celestion CDX1-1430 tweeter
• MRH-83 tweeter horn 
• MHA-35 screw adapter
• ST-410GM terminal 
• ST-955GM terminal 
• BP-500G pole terminals 
• MBR-100 bass reflex tube (can be shortened to 4 cm) 
• MBR-100 bass reflex tube 
• 2 mats of MDM-60 convoluted foam
• 6 pieces of Sonofil insulation wool (instead of MDM-3, not produced) 
• 1 piece of MDM-30 heavy foam
• HF10 rubber feet 
• self-adhesive sealing tape 
• 8 pieces of PAN 4x20 screws 
• 8 pieces of MZF-8605 screws with drive-in nut 
• 8 pieces of Allen wood screws 4x16mm (MZF-8614) 
• 3m cable 2x2.5 mm2
• the assembly instructions (the Monacor loudspeaker DIY booklet) to assemble the crossover components*) on wood: 
• 1.0 mH air coil / 1.4 mm *)
• 0.33 mH air coil / 1.4 mm *) 
• 0.39 mH air coil / 1 mm
• 1.8 mH air coil / 1.4 mm *) 
• 0.27 mH air coil / 1 mm 
• 2 pieces 22 μF MKP capacitor / 400V *)
  
• 3.3 μF MKP capacitor / 400V 
• 15 μF MKP capacitor / 400V 
• 3.9 μF MKP capacitor / 400V 
• 8.2 μF MKP capacitor / 400V
• 68 μF MKP capacitor / 400V *) 
• 10 Ohm resistor, 20W 
• 3.9 Ohm resistor, 20W 
• 8.2 Ohm resistor, 20W 
• 6.8 Ohm resistor, 20W
  
• 4 pieces 15 Ohm resistor, 20W