Audaphon Avior floorstanding speaker kit with high-end crossover

SHIPMENT IN 7-10 WORKING DAYS

€1,082.00

Tax included

No review at the moment

Audaphon Avior floorstanding speaker kit with high-end crossover

Kit with high-end crossover without housing, price per speaker

The high-end kit is equipped with copper foil and baked enamel coils in the important places to reduce the microphonic effect (the current through the coil generates a magnetic field, which in turn sets the winding in motion. This movement induces voltages in the coil, which are added to the useful signal. The tighter the winding of the coil, the less the useful signal is distorted.) All capacitors are of the MKP type and the capacitors for the tweeter - where quality is particularly important - are high-quality Clarity Cap ESA capacitors with 250 V.

Estimated Shipping Costs

Shipping Costs

€33.60

Shipping Time

Want to check another country or courier?

Description
Product Details

Audaphon Avior floorstanding speaker kit with high-end crossover

Kit with high-end crossover without housing, price per speaker

The Avior is a 2-way high-end floorstanding loudspeaker with high-quality chassis. The Avior uses the excellent Audaphon Neo Pro 5i as a tweeter and two Wavecor WF182CU13 of the highest quality as bass-midrange speakers. The loudspeaker was developed by Dennis Frank and Daniel Gattig. The crossover consists of a 3rd order high pass (18 dB / octave) for the tweeter, a suction circuit smooths the frequency response between 5 kHz and 20 kHz. The two woofers are connected to a 12 dB filter and two suction circuits smooth the frequency response at 1.2 kHz and 4.5 kHz. The frequency response of the loudspeaker is very linear. The decay spectrum is almost flawless. The non-linear distortions at low volumes (85 dB, 1 m) are below 0.4% above 500 Hz and remain below 0.5% even at (95 dB, 1 m).

Technical data:

Impedance: 4 Ohm
Sound pressure level (2.83V/1m): 90 dB
Dimensions (HxWxD): 1200 x 250 x 319 mm
Frequency range (-8dB): 33 - 39000 Hz
Crossover frequency(s): 2000 Hz
Principle: bass reflex box

Highlights

Audaphon Ribbon NeoPro5i, aluminum, black, 1/2 pack
2x Wavecor WF182CU13, 8 Ohm, paper, BD, phase plug
2x bass reflex tube HP70, 68x160 mm, black
3x insulation material Sonofil 100 x 35 cm for 20 liters
Biwiring terminal T122 Au with gold-plated brass terminals
3m speaker cable 2x1.5 mm2, transparent
Pan screws 4x20 black, 8 pieces
1.5x Allen wood screws 4x25 mm, black 8 pieces
Construction plan for the kit the crossover components (right), to be assembled on a wooden board.
Audaphon MKP 1.8 μF / 400 Vdc
ClarityCap PWA capacitor 2.7 μF / 160 Vdc
ClarityCap PWA capacitor 4.7 μF / 160 Vdc
ClarityCap PWA capacitor 10 μF / 160 Vdc
ClarityCap ESA capacitor 5.6uF / 250 Vdc
ClarityCap ESA capacitor 15 μF / 250 Vdc
Mundorf foil coil CFC14-1.2mH/0.26Ohm
Mundorf baked varnish air coil BL71, 0.39 mH/0.51 Ohm
Mundorf baked varnish air coil BL71, 0.47 mH/0.57 Ohm
Mundorf baked varnish air coil BL71, 4.7 mH/2.19 Ohm
0.7 mm air coil, 0.068 mH
3x metal oxide resistor MOX10 2.2 Ohm (red-red-gold)
Metal oxide resistor MOX10 3.9 Ohm (orange-white-gold)
Metal oxide resistor MOX10 5.6 Ohm (green-blue-gold)