Audaphon Adhara floorstanding loudspeakers Kit with high-end crossover

Kit with high-end crossover without housing, price per speaker

.

The high-end kit is fully equipped with baked enamel coils to reduce the microphonic effect (the current through the coil generates a magnetic field, which in turn sets the winding in motion.

This movement induces voltages in the coil, which are added to the useful signal.

The tighter the winding of the coil, the less the useful signal is distorted.)

All capacitors are of the MKP type; the capacitors in series with the tweeter - where quality is particularly important - are high-quality Clarity Cap ESA capacitors with 250 V.

Technical data:

• Impedance: 8 Ohm
• Sound pressure level (2.83V/1m): 83 dB
• Dimensions (HxWxD): 1040 x 190 x 269 mm
• Frequency range (-8dB): 30 - 26000 Hz
• Crossover frequency(s): 2000 Hz
• Principle: bass reflex box

Highlights

• Audaphon AMT-1i
• Wavecor WF182CU13, 8 Ohm, paper, BD, phase plug
• Bass reflex tube HP70 XL, 70x220 mm, black
• Insulating fleece MT Bondum 800 (30 x 50 x 2 cm)
• 1.5x insulating material Sonofil 100 x 35 cm for 20 liters
• Pole terminals PK31, one pair, gold-plated, red+black
• 3m speaker cable 2x1.5 mm2, transparent
• Allen wood screws 4x25 mm, black 8 pieces
• Construction plan for the kit the crossover components (right), to be assembled on a wooden board.
• ClarityCap PWA capacitor 2.2 μF / 160 Vdc
• ClarityCap PWA capacitor 10 μF / 160 Vdc
• ClarityCap PWA capacitor 15 μF / 160 Vdc
• ClarityCap ESA capacitor 0.68uF / 250 Vdc
• ClarityCap ESA capacitor 4.7uF / 250 Vdc
• ClarityCap ESA capacitor 5.6uF / 250 Vdc
• ClarityCap ESA capacitor 22 μF / 250 Vdc
• Mundorf baked varnish air coil BL71, 0.015 mH
• Mundorf baked varnish air coil BL71, 0.22 mH/0.34 Ohm
• Mundorf baked varnish air coil BL71, 0.33 mH/0.48 Ohm
• Mundorf baked varnish air coil BL71, 3.3 mH/1.75 Ohm
• Mundorf baked varnish air coil BL140, 0.47 mH/0.19 Ohm
• Mundorf baked varnish air coil BL140, 1.8 mH/0.43 Ohm
• 2x metal oxide resistor MOX10 10 Ohm (brown-black-black)
• 2x metal oxide resistor MOX10 12 Ohm (brown-red-black)
• Metal oxide resistor MOX5 0.22 Ohm 5% (red-red-silver)
• Metal oxide resistor MOX5 12 Ohm (brown-red-black)

.

.