• New
Accuton Tigris Floorstanding Speakers as in K+T

Accuton Tigris Floorstanding Speakers as in K+T

SHIPMENT IN 7-10 WORKING DAYS
€1,757.00
Tax included
rating No review at the moment

Accuton Tigris Floorstanding Speakers as in K+T 

Kit without cabinet, price per speaker

Tigris is a 2 way high-end floorstanding speaker. The kit provides an air motion tranformer (AMT) and two woofers of highest quality.

Estimated Shipping Costs
Shipping Costs
€33.60
Shipping Time
.
Want to check another country or courier?

You might also like

 

Accuton Tigris Floorstanding Speakers as in K+T 

Kit without cabinet, price per speaker

.

Tigris is a 2 way high-end floorstanding speaker.
The kit provides an air motion tranformer (AMT) and two woofers of highest quality.
The AMT is the very linear Air Motion Transformer Audaphon AMT-1i with very low distorsion. The woofers are Accuton C173-6-191E. This Accuton woofers you can find in a lot of high quality speakers in the five digit price range. 
The crossover consists of a 1st order high-pass filter (6 dB per octave slope) for the tweeter.
An RCL circuit in parallel to the tweeter is smoothing the frequency response of the tweeter between 100 Hz and 2500 Hz. The woofers are connected to a 1st order low-pass filter (6 dB per octave slope).
An RCL circuit in parallel to the woofers smoothing the membran resonances of the hard ceramic membran of the woofers. Between 40 Hz and 21000 Hz, the frequency response of this loudspeaker is very linear on axis.
The decay spectrum is nearly perfect. At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are lower than 0.4% above 500 Hz and below 0.5% at 95 dB at 1 m .
.

Technical data:

  • Impedance: 8 Ohm
  • Sound pressure level (2.83V/1m): 89 dB
  • Dimensions (HxWxD): 1200 x 250 x 300 mm
  • Frequency range (-8dB): 30 - 28000 Hz
  • Crossover frequency(s): 2000 Hz
  • Principle: bass reflex box

.

Highlights

  • 2x Accuton/Thiel C173-11-191 mids/woofer, one unit
  • Audaphon AMT-1i
  • 2x Bass reflex tube HP100, 100x200 mm, black
  • 3x Damping fleece MT Bondum 800 (30 x 50 x 2 cm) 2x Damping Sonofil 100 x 35 cm for 20 litres
  • Binding Post PK28 I Ni, nickel plated (one pair, red and black)
  • 4m Speaker cable 2x1.5 mm2, red-black, 1 m
  • 1,5x Pan screws 4x20 black, 8 pieces
  • Plan for DIY kit
  • Audaphon MKP CAP Superior 1.0 μF / 400 Vdc
  • Audaphon MKP CAP Superior 8.2 μF / 400 Vdc
  • 2x Audaphon MKT CAP 4.7 μF / 160 Vdc
  • 1.3 mm air core coil, 1.8 mH/0.45 Ohm
  • 0.7 mm air core coil, 0.39 mH/0.49 Ohm
  • 0.7 mm air core coil, 1.8 mH/1.15 Ohm
  • Metal-oxide resistor, 10W 3.3 Ohm (orange-orange-gold)
  • Metal-oxide resistor, 10W 6.8 Ohm (blue-grey-gold)
  • Metal-oxide resistor, 10W 8.2 Ohm (grey-red-gold)
  • Metal-oxide resistor, 10W 15 Ohm (brown-green-black)

.

Accuton Tigris
2 Items

You might also like

Dayton Audio BR-1 2-Way Bookshelf Monitor Speaker Dayton Audio BR-1 2-Way Bookshelf Monitor Speaker 2
  • On sale!
  • -10%
SHIPMENT IN 7-10 WORKING DAYS
DIY speaker kit

Dayton Audio BR-1 2-Way Bookshelf Monitor Speaker

Dayton Audio
BR-1
rating 0 review
€386.10 €429.00
Dayton Audio BR-1 2-Way Bookshelf Monitor Speaker Kits, Pair highlightsInexpensive, easy-to-build 2-way system for the novice speaker builder Includes everything you need to build a pair Perfect introduction to the theory, construction and soldering of loudspeakers The fully finished case allows this kit to be completed in a few hours
Product added to wishlist
Product added to compare.

With our cookies offer you a simply and fast shopping experience.This remember you special offers and your preferences of navigation . If that is okay with you, you agree to the use of cookies for your preferences simply by clicking on "accept"

By closing this banner, scrolling this page, clicking on a link or continuing to browse in any other way, you consent to the use of cookies.